China OEM Niigata 280t All-Electric used Injection Molding Machine to Guinea Manufacturers

Product Detail

Product Tags

Feedback (2)

Our advancement depends on the superior gear ,superb talents and consistently strengthened technology forces for Japan , Hydraulic 40-100t , Japanese Injection Molding Machine , We encourage you to make get hold of as we've been wanting for companions inside our venture. We are sure you'll uncover doing company with us not only fruitful but also profitable. We've been prepared to provide you with what you require.

China OEM Niigata 280t All-Electric used Injection Molding Machine to Guinea Manufacturers Detail:

Niigata 280t all-electric used Injection Molding Machine

Youtube Video: https://youtu.be/8V2Loj9puxI

Model: MD280S-IV.

Year: 2006.

Screw diameter: 52mm.

Tie bar spacing: 620x620mm.

Injection Speed: 300mm/s.

Machine is in good running condition. You can always visit our warehouse to inspect it and test it running.

Daxin Machinery

-Over 200 units of used injection molding machines in stock
-All can be inspected in the same warehouse under one roof
-All can be powered on for test-run in working condition

sales@daxin88.com / daxin88@hotmail.com
Skype: daxin-machinery / www.daxin88.com
Mobile: +8613509620296 (whatsapp) / +6596479097 (WeChat)
Follow Daxin Machinery: Facebook, Twitter, Google+, LinkedIn, Youtube.

Product Image

Product detail pictures:

In order to give you convenience and enlarge our business, we also have inspectors in QC Team and assure you our best service and product for China OEM Niigata 280t All-Electric used Injection Molding Machine to Guinea Manufacturers, The product will supply to all over the world, such as: Marseille , New Zealand , Tunisia , Be sure to feel cost-free to send us your specs and we are going to respond for you asap. We have got a experienced engineering team to serve for the every single comprehensive needs. Free samples may be sent for yourself personally to know far more facts. So that you can meet your desires, please actually feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.

Mechanical Systems's Fully Automatic Pet Bottle Blowing Machine ,equipment is one high precision and speedy to make, bottles used for Water, Carbonated drinks, Hot fill juices, Pharmaceuticals & cosmetics , but also can used for different bottle shapes filling in one machine. With change over parts. Greatly improve the equipment usage
scope. Production capacity is from 2,000 bottles per hour to 4,000 bottles per hour can be chosen by customers. Main-frame machine adopts frequency conversion timing motor, convenient adjustment speed within throughput.

We are making 2 cavity, 4 cavity, 6 cavity Blow Machines fully auto as well as semi auto 2 cavity with auto drop feature as well.

C. Machine Features:
C.1. Stably performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheated.
C.4. High adjustability to enable the preheated to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheated with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.

We, Steplead International Co. Ltd, are one of the leading companies in designing and manufacturing water filling machine, hot filling machine, carbonated beverage filling machine, and other liquid filling machine in mainland China. We also manufacture PET bottle blowing machine, water filter, labeling machine, injection molding machine, water dispensers (water coolers), ice maker and fireworks sparklers making machines.
Steplead, ISO 9001:2000-certified enterprise, covers total area of 10, 000 square meters, equipped with 5 production lines. We provide one-stop technical service, including water plant layout design, installation, debugging, commissioning and maintenance. We can provide the technical training for clients. When the equipment gets something wrong, our technicians will provide solutions within several hours. Besides, if necessary, we can dispatch the technician to solve the problems on spot.

For more information about our products, please feel free to contact us by
John Lau.
Sales Manager
Steplead International Co.,Ltd.
Address: Shenhua Industry Zone, Shang Mei Lin, Futian District, Shenzhen, China .
Cel: (+86) 13670181318
Email: johnlauvip@gmail.com
Website: www.steplead.com
Facebook: https://www.facebook.com/lau.john.942
Twitter: https://twitter.com/Steplead_filler
Google+:https://plus.google.com/+StepleadFillTech
Blogger:https://stepleadcom.blogspot.hk/

********************************************************

Check details of thin wall products injection molding machines: https://www.powerjet-machinery.com/high-speed-thin-wall-injection-molding-machine/ Any ...

This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.

By Edwina from Provence - 2017.11.01 17:04

The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.

By John from New Delhi - 2017.08.18 11:04