China wholesale Fanuc 100t All-Electric used Injection Molding Machine Wholesale to Colombia

Product Detail

Product Tags

Feedback (2)

Innovation, excellent and reliability are the core values of our firm. These principles today more than ever form the basis of our success as an internationally active mid-size corporation for Japanese Injection Molding Machine , Plastic Injection Molding Machine , Used Plastic Injection Molding Machine , Looking to the future, a long way to go, constantly striving to become the all staff with full enthusiasm, one hundred times the confidence and put our company built a beautiful environment, advanced products, quality first-class modern enterprise and work hard!

China wholesale Fanuc 100t All-Electric used Injection Molding Machine Wholesale to Colombia Detail:

Fanuc 100t Fully-Electric used Injection Molding Machine.

Youtube Video: https://youtu.be/8Gy9Ql9J65Y

Model: S-2000i100A.
Year: 2005.
Screw diameter: 26mm.
Tie bar spacing: 410x410mm.
Shot weight ~ 48g.
Opening stroke: 350mm.
Max daylight opening: 800mm.

Machines are in good working condition,kept in our warehouse at ShenZhen of China, very near HongKong and GuangZhou.Interested customers can visit us after Chinaplas to power on machines for test-run.

Product Image

Product detail pictures:

The shopper satisfaction is our primary focus on. We uphold a consistent level of professionalism, quality, credibility and repair for China wholesale Fanuc 100t All-Electric used Injection Molding Machine Wholesale to Colombia, The product will supply to all over the world, such as: Netherlands , Macedonia , Haiti , Immediate and expert after-sale service supplied by our consultant group has happy our buyers. Comprehensive Info and parameters from the merchandise will probably be sent to you for any comprehensive acknowledge. Free samples may be delivered and company check out to our corporation. n Morocco for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.

Mechanical Systems's Fully Automatic Pet Bottle Blowing Machine ,equipment is one high precision and speedy to make, bottles used for Water, Carbonated drinks, Hot fill juices, Pharmaceuticals & cosmetics , but also can used for different bottle shapes filling in one machine. With change over parts. Greatly improve the equipment usage
scope. Production capacity is from 2,000 bottles per hour to 4,000 bottles per hour can be chosen by customers. Main-frame machine adopts frequency conversion timing motor, convenient adjustment speed within throughput.

We are making 2 cavity, 4 cavity, 6 cavity Blow Machines fully auto as well as semi auto 2 cavity with auto drop feature as well.

C. Machine Features:
C.1. Stably performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheated.
C.4. High adjustability to enable the preheated to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheated with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.

We, Steplead International Co. Ltd, are one of the leading companies in designing and manufacturing water filling machine, hot filling machine, carbonated beverage filling machine, and other liquid filling machine in mainland China. We also manufacture PET bottle blowing machine, water filter, labeling machine, injection molding machine, water dispensers (water coolers), ice maker and fireworks sparklers making machines.
Steplead, ISO 9001:2000-certified enterprise, covers total area of 10, 000 square meters, equipped with 5 production lines. We provide one-stop technical service, including water plant layout design, installation, debugging, commissioning and maintenance. We can provide the technical training for clients. When the equipment gets something wrong, our technicians will provide solutions within several hours. Besides, if necessary, we can dispatch the technician to solve the problems on spot.

For more information about our products, please feel free to contact us by
John Lau.
Sales Manager
Steplead International Co.,Ltd.
Address: Shenhua Industry Zone, Shang Mei Lin, Futian District, Shenzhen, China .
Cel: (+86) 13670181318
Email: johnlauvip@gmail.com
Website: www.steplead.com
Facebook: https://www.facebook.com/lau.john.942
Twitter: https://twitter.com/Steplead_filler
Google+:https://plus.google.com/+StepleadFillTech
Blogger:https://stepleadcom.blogspot.hk/

********************************************************

https://www.perfumeoils.com/index.php?p=product&id=1386.