Factory Outlets Sumitomo SG125M Used Injection Molding Machine (high speed) to St. Petersburg Manufacturer
Factory Outlets Sumitomo SG125M Used Injection Molding Machine (high speed) to St. Petersburg Manufacturer Detail:
Sumitomo 125t high speed injection molding machine.
Model: SG125M.
Year of manufacture: 2002.
Injection speed: 300mm/s.
Tie bar spacing: 460x460mm.
Opening stroke: 300mm.
Motor capacity: 22kw.
Heater capacity: 11.2kw.
Machine is high speed with accumulator. It is in good runnin condition. Interested customer is welcome to visit our warehouse to inspect the machine.
Product Image
Product detail pictures:
Related Product Guide:
Plastic Injection Molding: Past, Present and Future
The Emergence of Injection Molding in Plastic Industry
To regularly increase the management program by virtue from the rule of "sincerely, good religion and high quality are the base of enterprise development", we greatly absorb the essence of linked products internationally, and constantly produce new goods to satisfy the calls for of shoppers for Factory Outlets Sumitomo SG125M Used Injection Molding Machine (high speed) to St. Petersburg Manufacturer, The product will supply to all over the world, such as: Italy , Accra , Gabon , With strong technical strength and advanced production equipment, and SMS people purposefully , professional, dedicated spirit of enterprise. Enterprises took the lead through the ISO 9001:2008 international quality management system certification, CE certification EU ; CCC.SGS.CQC other related product certification. We look forward to reactivating our company connection.
This video is taken in Chinaplas2016 Shanghai. Machine in the video is our latest model: HFTF-80T which is designed special for high yield production need with forming area of 762*470mm. Sample cup in the video is pet material with 92.5mm diameter.
APPLICATION:
HFTF-80T-H Automatic Thermoforming Machine suitable for PP, HIPS, PVC , PET,ETC. sheet.
Main Technical Specification
1- Max. Forming Area 762×470mm
2- Max. Forming Depth 180mm
3-Clamping Force 650KN
4- Max Sheet Width Range 820mm
5- Sheet Thickness 0.4-2.5mm
6- Air Pressure 0.7-0.85mpa
7- Water Consumption 50L/min
8- Air Consumption 5000L/min
9- Max.No-load Speed 42 Cycles/min
10- Power (Three Phase Four Wire) 3×380V+N+PE.50HZ
11- Heating Power 150kw
12- Main Motor Power 15kw
13- Stretch Motor Power 15kw
14- Feeding Motor Power 5.5kw
15- Machine Weight 15500kg
16- Dimension 13000×4500×3800mm
Electric motor Armature repair, NEVER TRY THIS EVER! Electricity can and will kill you if your are not careful, if you have a bad armature, replace it, do not try to repair it, this only shows you the mechanics of an armature and this probably won't last long. I ended up using a brass brush instead, the copper did not last long, and don't forget to clean your graphite brushes with light sanding. I also put a heat resistant ring around both ends of the armature brushes cut out of tubing and glued them in, this worked good at holding the brush in place. Any time you experiment with motors they can hold a spark for a long time after you are done so make sure you watch your project for a while after to prevent any fire hazard. Again don't ever do this just replace the armature with a brand new one, or better yet get a new tool. The cost for a new tool is similar to an armature cost, this is desert island science, for those people stranded on an island with nothing but spare parts. keep inventing'
By Edith
from Russia
- 2018.12.10 19:03
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Lesley
from Algeria
- 2017.09.29 11:19
