1. The injection device and the mold locking device are on the same vertical centerline, and the mold is opened and closed along the up and down direction. Its floor area is only about half of that of the horizontal machine. Therefore, the productivity converted into floor area is about twice.
2. Easy to realize insert molding. Because the die surface is upward, it is easy to put the insert into position. If the lower formwork is fixed and the upper formwork is movable, and the belt conveyor is combined with the manipulator, the full-automatic insert molding can be easily realized.
3. The weight of the mold is supported by the horizontal formwork to open and close up and down, which will not happen the phenomenon that the formwork cannot be opened and closed due to the forward fall caused by the gravity of the mold similar to the horizontal machine. It is conducive to maintaining the accuracy of machinery and mold for a long time.
4. The cavity of each plastic part can be taken out by a simple manipulator, which is conducive to precision molding.
5. Generally, the mold locking device is open around, which is easy to configure various automatic devices, and is suitable for the automatic forming of complex and exquisite products.
6. The belt drawing conveying device is easy to be installed in series through the middle of the die, which is convenient to realize automatic molding production.
7. It is easy to ensure the consistency of resin fluidity and mold temperature distribution in the mold.
8. Equipped with rotating table, moving table and inclined table, it is easy to realize insert molding and in mold combined molding.
9. During small batch trial production, the die has simple structure, low cost and easy unloading.
10. Having withstood the test of many earthquakes, the vertical machine has better seismic resistance than the horizontal machine due to its low center of gravity.
Send your message to us:
Post time: Mar-28-2022
