Hot sale Factory Kawaguchi 125t used Injection Molding Machine to Bangladesh Importers

Product Detail

Product Tags

Feedback (2)

Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for Taiwan Injection Molding Machine , Japan Injection Machine , Plastic Injection Molding Machine , We guaranteed high quality, if clients were not satisfied with the products' quality, you can return inside 7days with their original states.

Hot sale Factory Kawaguchi 125t used Injection Molding Machine to Bangladesh Importers Detail:

Kawaguchi 125t used Injection Molding Machines

Model: K-125.

Year: 1992.

Screw diameter: 42mm.

Tie bar spacing: 420mm.

Two units for sale. Good working condition. Interested customer can visit our warehouse to inspect the machines and test them running under power.

Product Image

Product detail pictures:

All we do is usually connected with our tenet " Consumer initial, Rely on 1st, devoting around the food stuff packaging and environmental safety for Hot sale Factory Kawaguchi 125t used Injection Molding Machine to Bangladesh Importers, The product will supply to all over the world, such as: Anguilla , Holland , Maldives , We strongly believe that technology and service is our base today and quality will create our reliable walls of future. Only we have better and better quality , could we achieve our customers and ourselves, too. Welcome customers all over the word to contact us for getting further business and reliable relationships. We are always here working for your demands whenever you need.

It's a short video of our ZX-7.5KW production inline homogenizer tested by water. The 30L stainless steel powder hopper is double jacketed with insulation. To learn more about our ZX-7.5KW/10HP production inline homogeniser, please visit our website here: https://www.ginhong.com/products/high-shear-mixer/inline-homogenizer/.

What is production inline homogenizer?
ZX production inline homogenizer, usually called inline high shear mixer, is an inline mixer for the manufacturing of viscous cream, lotion and other emulsions in the cosmetic, pharmaceutical, food and chemical industries. It’s the heart of our RB vacuum emulsifier mixer and is suitable for continuous mixing.

What is production inline homogenizer made of?
ZX high shear inline mixer is usually made of one set of rotor and stator, mechanic seal, transmission part and motor etc. The body of the in line mixer is mounted on a stainless steel base. An inlet and outlet ports are used to connect to the manufacturing vessel for circulation. A drain port is opened at the bottom of the chamber for cleaning purpose.

How does production inline homogenizer work?
The rotor of the in line mixer is driven by ABB or Siemens motor and rotates at the speed of 3000rpm causing strong centrifugal force. The raw materials are sucked from the inlet of the stator into the high shear mixing chamber.

The strong centrifugal force drives the product to the narrow gap between the rotor and stator. The product is pressed and crushed by the centrifugal force and then got dispersed, homogenized and emulsified preliminary.

Meanwhile, the rotor produces a linear velocity up to 15~40m/s along the tangent. The product goes through the gap between rotor and stator and is dispersed, high sheared, emulsified and homogenized. Then it jets out from the outlet of the high shear mixing chamber.

Because the high shear in line mixer is usually mounted with a mixing tank by circulation pipes, the product is sucked from the bottom of the tank, jets out from the pipe and then goes back into the tank. After several circulations, it’s completely high sheared, dispersed, emulsified and homogenized.
Key features of production inline homogenizer
Complete process of dispersing, high shearing, emulsifying and homogenizing
Flow rate by water from 1.5m³/h to 110m³/h
Suitable for making cream, lotion, ointment and other emulsions of 5,000~100,000cps viscosity
Suitable for continuous mixing process of large quantity with high efficiency
High shear inline mixer with circulation pipes to the mixing tank for even homogenization
Products can’t bypass the precision rotor and stator workhead
The self-pumping in line high shear mixer also works as a transfer pump for discharging finished product
Cooling system for the mechanic seal for longer high shear mixing time
Work with different manufacturing vessels
All Ginhong inline high shear mixers are designed for CIP and SIP
All contact parts are made of SS316L/304
Sanitary clamp connections for inlet and outlet ports
The specifications of the inline continuous mixer comply with cGMP regulations
Power supply of 380V, 50Hz, 3 Phase

SOLD MACHINE

used Extrusion Blow Moulding Up to 1l Brand: MAGIC Model: MGL 2-3-D Year: 1999

https://www.machinepoint.com/machinepoint/inventory.nsf/idmaquina/300027131?opendocument&ln=en&origin=YouTube

Extrusión Soplado Hasta 1 l Usada Marca: MAGIC Modelo: MGL 2-3-D Año: 1999
Macchina Usata: Estrusione soffiagio fino 1lt
Beschreibung der Gebrauchtmaschine: Extrusionsblasformmaschine bis zu 1l
Description de la Machine d'occasion: Extrusion soufflage jusqu'à 1l
Használt gép: Extrudálás Fröccsöntés Blow Up a 1L
Б/У Оборудование:Экструзионно-выдувные машины 1л
Použitý Stroj: Extruze Vyfukovací tvarování až 1 litr
Maszyna używana: Wytłaczarka do 1 litra
Kullanılmış makine: 1 l kadar Ekstrüzyon Şişirme

After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.

By Sahid Ruvalcaba from Muscat - 2017.06.16 18:23

As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!

By Mamie from South Korea - 2018.06.05 13:10